Sprinkler is the most important part of portrait machine, so the best maintenance of photo machine nozzle is very important. In addition, when the spray head of the photo machine is blocked, how to clean it correctly is the key. Today, we give a detailed introduction to the small knowledge of the maintenance of the spray head and the way of cleaning.
Portrait machine sprinkler maintenance small knowledge
1, every day after the completion of the photo machine work after a long night, in order to ensure that the photo machine is still the best state of the nocturnal nozzle, the need to do the following maintenance. First of all, we must turn off the power of the photo machine, then clean the moisturizing sponge with special cleaning liquid, then move the head back to the right side of the cleaning station to combine the nozzle with the moisturizing sponge.
2. The life of the spray head is closely related to the quality of the ink. Some inferior ink often causes the plugging of the sprinkler. Long time use causes the nozzle to be damaged ahead of time. In addition, poor quality ink also affects the quality of printing, so it is best to choose the quality ink of the equipment manufacturer, which can protect the portrait machine and print out the more clear and perfect image.
3, the photo machine will be interfered by static electricity in normal work, so we must connect the ground wire and do well in electrostatic protection. In addition, when maintaining the photo printer nozzle, do not directly contact the photo printer nozzle with your hands. You must wear protective gloves.
Cleaning mode of portrait machine nozzle
Photo printer nozzle is a precision component. If you don't pay much attention, you may get clogging. The nozzle blockage is usually caused by the coagulating objects or impurities in the sprinkler. When the spray head is blocked, it can be cleaned by the following cleaning methods.
1, photo machine nozzle cleaning, cleaning is the ink sac and its inside filter. Photo machine ink sac and filters are combined together. Use a syringe to clean water or wine clear from the ink ink bag is pressed into the mouth, or from the other end pumping. Until no impurities or contaminants were extracted.
2, pour the cleaning fluid into the printer nozzle cleaner. The height is just soaked through the sprinkler head. Don't let the washing liquid contact the circuit board of the sprinkler. Let the nozzle keep soaking in the cleaning liquid for more than a few hours so that the cleaning liquid can play a role. In the process of soaking, it is used with the printer's sprinkler cleaner to help the cleaning effect.
Note that when cleaning the photo machine nozzle, we must cut off the power of the photo machine. The second photo machine nozzle is precision delicate, in cleaning care must be taken to prevent the damage of photo machine nozzle!